Steel pipe bending advice

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, erikscimitardemon, Roger Pennington, philhoward, Lukeyboy46

User avatar
RSSOC Member
Posts: 1180
Joined: Sat Sep 29, 2012 10:11 pm
Location: Smethwick, West Midlands
Has thanked: 35 times
Been thanked: 21 times

Steel pipe bending advice

Post by manny » Mon Mar 25, 2019 7:59 pm

i have to do something similar with an aluminium 5/8 tube (1.2mm walls) but suspect it will easier than steel..?

Posts: 118
Joined: Mon Aug 28, 2017 11:51 am
Has thanked: 7 times
Been thanked: 12 times

Steel pipe bending advice

Post by stevecrosby63 » Mon Mar 25, 2019 8:02 pm ... nditioning
have a look for something along these lines, the alloy type are fine for brake lines etc but won't be man enough for steel...and probably not 10mm but likely 3/8ths anyway
i've used the meatier hand formers before and can vouch to their ability

i'm making this up as i go along :shock:

Post Reply

Return to “General Technical Discussion”