Clutch replacement torque figures 1800ti

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Post Reply
Dcrosby13
RSSOC Member
Posts: 650
Joined: Mon Mar 28, 2016 5:28 pm
Location: Warrington
Has thanked: 4 times
Been thanked: 17 times

Clutch replacement torque figures 1800ti

Post by Dcrosby13 » Thu Jul 12, 2018 11:20 am

Apologies if this has been covered elsewhere, I did have a quick search but I could not find anything. I am replacing the clutch assembly on my TI for an uprated Exedy one, I also might need to remove and replace the flywheel as its looking worse for wear. please can someone confirm the torque figures for the pressure plate bolts and flywheel bolts along with the engine to gearbox bolts. thanks in advance. also any tips would be greatly appreciated.


I break stuff...... :w

Dcrosby13
RSSOC Member
Posts: 650
Joined: Mon Mar 28, 2016 5:28 pm
Location: Warrington
Has thanked: 4 times
Been thanked: 17 times

Clutch replacement torque figures 1800ti

Post by Dcrosby13 » Thu Jul 12, 2018 2:56 pm

clutch cover bolts 12-15 ft/lb flywheel bolts 72-80ft/lb


I break stuff...... :w

User avatar
Corky
RSSOC Member
Posts: 10606
Joined: Sun Sep 24, 2006 5:02 am
Location: Macclesfield
Has thanked: 130 times
Been thanked: 142 times

Clutch replacement torque figures 1800ti

Post by Corky » Thu Jul 12, 2018 3:22 pm

The challenge is doing the flywheel bolts without spinning the engine. I gave up and just used my wheel gun, which usually gives about 90lb. I also threadlocked them too. It’s such a PITA to get to them if they need nipping up!

I think I used Subaru WRX flywheel bolts, they were same thread, length and rating as ARP etc.


Steve
Current:- SS1 Ti RG sprint car. VW Touareg 3.0 V6
Prev:- Sabre Ti, 3xSS1 Ti, SS1 16v Turbo Racer, 5XGTC, 2XSE6B, 2XSE5A, 2XV6 Coupe, Sabre 6
Project Threads & YouTube

“It's not the winning, it's the taking apart that counts"

Dcrosby13
RSSOC Member
Posts: 650
Joined: Mon Mar 28, 2016 5:28 pm
Location: Warrington
Has thanked: 4 times
Been thanked: 17 times

Clutch replacement torque figures 1800ti

Post by Dcrosby13 » Thu Jul 12, 2018 8:33 pm

Yeah I stuck some threadlock on


I break stuff...... :w

Post Reply

Return to “SS1/SST/Sabre”