Power steering pump bracket

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon

Post Reply
Masterblaster
Posts: 13
Joined: Wed Oct 31, 2018 7:31 pm

Power steering pump bracket

Post by Masterblaster » Sun Aug 09, 2020 2:12 pm

Hi all, I'm currently at the power steering pump stage , having delved into the box of parts I've found the rear bracket of the pump only fastens to the adjuster bolt on the back of the pump because I am short of a small tri holed bracket that bridges the other securing bolts would I be OK fabricating a bracket of sorts to replace the missing item?
I'm having the usual problems trying to re build a car someone else has taken apart and put most bits and bolts in a box , thanks in advance, Andrew



gtcse8
RSSOC Member
Posts: 3121
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Power steering pump bracket

Post by gtcse8 » Mon Aug 10, 2020 6:06 pm

Hi Andrew
Where are you?.
I have lots of bits for the PAS system.
Which engine is it fitted to?.
Mark


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

Masterblaster
Posts: 13
Joined: Wed Oct 31, 2018 7:31 pm

Power steering pump bracket

Post by Masterblaster » Tue Aug 11, 2020 7:39 pm

Hi, I'm in North East nr Saltburn by the sea , Essex engine, its the smaller bracket at the rear of the pump, cheers



gtcse8
RSSOC Member
Posts: 3121
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Power steering pump bracket

Post by gtcse8 » Tue Aug 11, 2020 8:08 pm

Saltburn LOL.

Been up in your area loads in the past.

Always did North East Summer meetings.

Peter and I are old friends.

Will be at the storage units over the weekend if you can wait ??.

Mark


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

Masterblaster
Posts: 13
Joined: Wed Oct 31, 2018 7:31 pm

Power steering pump bracket

Post by Masterblaster » Tue Aug 11, 2020 8:23 pm

Hi yes I can wait, plenty more jobs on the go with it, as always many thanks Andrew



Post Reply

Return to “Se6/6a/6b/GTC”