The right radiator cap

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon

User avatar
scimjim
RSSOC Member
Posts: 40769
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester

The right radiator cap

Post by scimjim » Tue Sep 22, 2020 10:20 am

3AE613EA-CE85-4142-BF1E-0A3EA3E8F03B.gif
3AE613EA-CE85-4142-BF1E-0A3EA3E8F03B.gif (4.26 KiB) Viewed 258 times


Jim King

SECURE DRY STORAGE FOR YOUR SCIMITAR

Current: SE5 (8Ball), 1400 1600 1800 Zetec ST170 powered SS1 (G97), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre, TI SS1 (snotty), 1600 SS1 (C686CCR).
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), 1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

User avatar
philhoward
RSSOC Member
Posts: 27890
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Contact:

The right radiator cap

Post by philhoward » Tue Sep 22, 2020 10:24 am

A picture tells a thousand words. 8)


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
SS1 Racer
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

User avatar
Dennis Nicholas
RSSOC Member
Posts: 794
Joined: Wed Jun 20, 2007 1:22 pm
Location: Devon

The right radiator cap

Post by Dennis Nicholas » Wed Sep 23, 2020 9:23 am

philhoward wrote:
Tue Sep 22, 2020 2:41 am
Dennis Nicholas wrote:
Mon Sep 21, 2020 11:23 pm
Thomaswo wrote:
Wed May 27, 2020 8:00 pm
I googled the ford part no. now, but most of the links were wrong. Most caps are short reach (app. 24 mm height) but we need long reach (34 mm). Else it wont fit.
Beware that some caps with the correct part number at a supplier may be just the tiniest bit short so that the bottom seal does not seal on the housing......it baffled me for a while when I put a new one in......water gets pumped out into expansion tank and overflows.
Dennis
I’d say that was a badly manufactured cap though, not the wrong cap. Which supplier so one can avoid, Dennis?
Barnstaple, Devon firm no longer exist. It was on books as all the correct parts numbers and car identity.


Dennis Nicholas(RSSOC)
1980 GTC Trafalgar Blue, 2010 basic Skoda Yeti (petrol), Austin 7s, Rileys.

Scim8tar
Posts: 168
Joined: Sat Dec 28, 2019 4:52 pm

The right radiator cap

Post by Scim8tar » Thu Sep 24, 2020 10:46 pm

Buying a rad cap can be confusing due in part to the way seller's measure them, some use seal to seal and some use total height, best thing is to measure the neck depth then add on approx 3 mm for seal to seal measurements and a further approx 4 mm for total height.
long reach was used on early MG's (1inch neck depth), cap (approx 1"1/8 seal to sea)l, then later 3/4" neck depth, you could struggle to find a 13lb long reach, i think the nearest will be 15lb and 26mm seal to seal (approx 30 mm) total height.
Total height also varies due to different recovery valve designs.


Paul



Scim8tar
Posts: 168
Joined: Sat Dec 28, 2019 4:52 pm

The right radiator cap

Post by Scim8tar » Fri Sep 25, 2020 9:28 am

I stand corrected, is this the one you need ? https://www.ebay.co.uk/itm/13-lb-Long-R ... SwQZdcUtg-


Paul



PilotLight
Posts: 44
Joined: Sat May 16, 2020 7:45 pm
Location: Suffolk

The right radiator cap

Post by PilotLight » Fri Sep 25, 2020 1:24 pm

I love this forum!
I'm learning so much about my car, I've just fitted a thermostat to my own 6a and it's really interesting to understand how this cooling system works.

I'm off outside to check mine has the right pressure and height cap!

Thanks for sharing your experience guys.

Andy



Post Reply

Return to “Se6/6a/6b/GTC”