Wakeup Sully

If you have a long-term project and would like to share/document progress, this is for you.

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon

rebel alliance
Posts: 1313
Joined: Thu Mar 03, 2016 9:20 pm

Wakeup Sully

Post by rebel alliance » Mon Oct 12, 2020 7:02 pm

If it gets worse i found a more suitable car for you....Comes with mirrors 😊
Attachments
20201011_102113~2.jpg
20201011_102113~2.jpg (331.15 KiB) Viewed 262 times



rjudcsx
RSSOC Member
Posts: 851
Joined: Thu Mar 05, 2020 1:12 pm
Location: Chapel St Leonards LINCS

Wakeup Sully

Post by rjudcsx » Mon Oct 12, 2020 11:03 pm

Thanks Rebel , you will be pleased to know that I have consulted the GP and I can have a procedure done , at great expense , that will freeze my middle finger on my right hand in a extended position as my other fingers curl up , I have put my name on the list , just for you . :lol: Richard .



rjudcsx
RSSOC Member
Posts: 851
Joined: Thu Mar 05, 2020 1:12 pm
Location: Chapel St Leonards LINCS

Wakeup Sully

Post by rjudcsx » Thu Oct 15, 2020 12:03 am

Just a brief up date , as some of you will have read on my other post I am struggling with one of the most complicated technical automotive problems one can encounter , putting the two bolts back in to the base of the rad :oops: . They WILL go in tomorrow. Put my new braided clutch pipe on , it is a bit longer than the old red plastic one so I had to be careful of the route it took to ensure it did not rest against any thing hot . Although the previously mentioned two bolts are not in I did fill the water system up and ran the car up , as it has not been started for about a week , got the air locks out and checked the heater .The engine appears to run slightly cooler by a few degrees , but that is just sat on the drive and not on the road yet [ or it may just be that it was a cold day on the coast ] Regards Richard .



User avatar
Old and Slow
RSSOC Member
Posts: 1700
Joined: Tue Jan 20, 2015 5:37 pm
Location: East Berks

Wakeup Sully

Post by Old and Slow » Thu Oct 15, 2020 9:24 am

So if your engine is running hot just take the two lower mounting bolts out of the rad...et voila?


Philip Needham
Ashley-bodied TR3; '54 Ford Consul; '55 AC 2-Litre Saloon;'65 850 Mini; '70 Ford Zodiac MkIV; XR3i
'81 911SC Targa, '64 Sabre Six

rjudcsx
RSSOC Member
Posts: 851
Joined: Thu Mar 05, 2020 1:12 pm
Location: Chapel St Leonards LINCS

Wakeup Sully

Post by rjudcsx » Thu Oct 15, 2020 10:00 am

I may have stumbled on a very useful modification Philip , now, what did I do with my Patent proforma ,might be a few quid in this. 2% ok for you Philip ? :lol: Richard .



User avatar
Old and Slow
RSSOC Member
Posts: 1700
Joined: Tue Jan 20, 2015 5:37 pm
Location: East Berks

Wakeup Sully

Post by Old and Slow » Thu Oct 15, 2020 1:28 pm

I already have my name on a patent, but the annual maintenance costs are too high. Let's go for Design Registration instead... :)


Philip Needham
Ashley-bodied TR3; '54 Ford Consul; '55 AC 2-Litre Saloon;'65 850 Mini; '70 Ford Zodiac MkIV; XR3i
'81 911SC Targa, '64 Sabre Six

Post Reply

Return to “Project Progress”