Replacement carpets

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon

KJF
Posts: 14
Joined: Mon May 06, 2019 1:52 pm

Replacement carpets

Post by KJF » Sun Jul 07, 2019 5:50 pm

Does anyone have experience of the carpet kits from Car Hoods or Coverdale as I will be ordering a set very soon once I have checked the colour samples of Autumn Leaf and Ochre with chocolate/tan coloured interior.

Has anyone experience of any other suppliers?

Finally, do the club have any deals negotiated with either supplier?

Thanks in advance!



User avatar
AJL Electronics
RSSOC Member
Posts: 8302
Joined: Fri Oct 17, 2008 8:49 pm
Location: Gloucester
Contact:

Replacement carpets

Post by AJL Electronics » Sun Jul 07, 2019 6:18 pm

You will get far lower cost with little extra work by buying off the roll. Commercial carpet sets are all wrongly cut, but anyone who complains is told that nobody else has ever had a problem. Make of that what you will.


Yes, we can mend your Scimitar!
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).

Fancy a holiday in Gael, France? http://www.ianrhu.com

There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.

ScimmyMike
RSSOC Member
Posts: 5097
Joined: Sun Mar 15, 2009 5:12 pm
Location: NW England

Replacement carpets

Post by ScimmyMike » Mon Jul 08, 2019 10:01 pm

As Andy said, the kits aren't a great fit and suppliers go all ostrich when it's mentioned to them, probably less work to buy a kit then modify but as I found it's the bound edge bits that needed work then rebinding so I figured buy off the roll and DIY getting edges bound as required and save a fair bit of money so long as you have carpet to creat patterns from in the first place.


SE4c rebuilding. SE5a similar it seems!
SAAB C900 2 door, Alfa Romeo GTV twinny
Scimitar SE4 SE4c SE5 SE6b Austin A35

High Peak Noggin Secretary & general dogsbody

www.high peak noggin

If things are going well with the rebuild you've missed a part out

peter
Posts: 60
Joined: Thu Oct 29, 2015 11:39 am
Location: Mullingar Ireland

Replacement carpets

Post by peter » Tue Jul 09, 2019 8:34 am

About 2 years ago I bought the complete set from Coverdale. No complaints. Two weeks delivery. The price was reasonable.
Hope this helps.
Peter



gtcse8
RSSOC Member
Posts: 3079
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Replacement carpets

Post by gtcse8 » Tue Jul 09, 2019 8:37 am

KJF what car are you doing up??.

The kits from coverdale for the SE6 and GTC are too complex and they even supplied sections for the fabric arm rests, go figure. :roll:
When I was full time with Reliants I tried to get a deal together for Scimitar owners but nothing came of it, then coverdale had a fire and lost the templates so I tried to get them to start from scratch with the Scimitars but the last Two sets I got from them were very fiddley to get to fit.

Is Gary Taylor from Manchester still out there?, he made a brilliant job on a few cars for me.


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

User avatar
1969SE5
Posts: 639
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire

Replacement carpets

Post by 1969SE5 » Tue Jul 09, 2019 10:31 am

my Coverdale ones were shocking, some additional bits that I still have no idea where they go, and most needed a lot of trimming, pretty dissapointing, its not the cost of the carpet, its the time and the effort in trying to get them in, then to stand back and think, well its OK but not perfect.................


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
philhoward
RSSOC Member
Posts: 27596
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Contact:

Replacement carpets

Post by philhoward » Tue Jul 09, 2019 10:36 am

Coverdale seem to think a 5 and a 5a have the same carpets which isn’t the case..and even then they aren’t a marvellous fit. That’s assuming you can figure out what to use where (and which bits you can modify).


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
SS1 Racer
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

Rev Light
RSSOC Member
Posts: 650
Joined: Sat Nov 14, 2015 11:54 am
Location: Swindon

Replacement carpets

Post by Rev Light » Tue Jul 09, 2019 10:37 am

I suppose it depends if you have some old carpet to use as templates.....My car has no carpet in any of the foot wells, having long since rotted away.


SE5a 'Fancier'

GTC Ian
RSSOC Member
Posts: 470
Joined: Fri Jun 24, 2011 10:50 am
Location: Whittlesey Cambs

Replacement carpets

Post by GTC Ian » Tue Jul 09, 2019 10:40 am

1969SE5 wrote:
Tue Jul 09, 2019 10:31 am
my Coverdale ones were shocking, some additional bits that I still have no idea where they go, and most needed a lot of trimming, pretty dissapointing, its not the cost of the carpet, its the time and the effort in trying to get them in, then to stand back and think, well its OK but not perfect.................
So disappointed with my set. Just such a poor fit. I wouldnt recommend them to anyone. In hindsight I wish I got our local trimmer to make them.
Last edited by GTC Ian on Tue Jul 09, 2019 12:59 pm, edited 1 time in total.


White GTC no 91 (Now getting the TLC it justly deserves)
Personal mechanic to Barbara's SS1
Previous SE5a JKG 236N (R.I.P)
Members since 1984

User avatar
scimjim
RSSOC Member
Posts: 40491
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester

Replacement carpets

Post by scimjim » Tue Jul 09, 2019 10:44 am

It does seem that the SE6 set (which they laughingly think is the same as a GTC) is worse than the 5 series. I managed to make a set fit my SE5 but it was particularly annoying having to cut bound edges. Their customer support is just non-existent.


Jim King

SECURE DRY STORAGE FOR YOUR SCIMITAR

Current: SE5 (8Ball), 1400 1600 1800 Zetec ST170 powered SS1 (G97), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre, TI SS1 (snotty), 1600 SS1 (C686CCR).
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), 1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

User avatar
Roger Pennington
RSSOC Member
Posts: 20319
Joined: Tue Aug 29, 2006 9:43 pm

Replacement carpets

Post by Roger Pennington » Tue Jul 09, 2019 12:26 pm

I can't speak for anything other than Se6a obviously, but it's worth noting that the original carpets didn't have bound edges, so if you end up making your own, without them, that's actually a more authentic option :)


....Roger

RSSOC member (since 1982)
- - - - - - - - - - - - - - - - -
Image

"Condition can be bought at any time; Originality, once lost, is gone forever" - Doug Nye

KJF
Posts: 14
Joined: Mon May 06, 2019 1:52 pm

Replacement carpets

Post by KJF » Fri Jul 12, 2019 12:04 am

Guys thanks for all your replies. I’ve decided to buy off the roll and cut myself getting any edges bound as required.

gtcse8, GTC chassis 305 is the car.



User avatar
TrevorG
RSSOC Member
Posts: 785
Joined: Fri Aug 24, 2012 9:09 am
Location: Thomas chapel in Pembrokeshire

Replacement carpets

Post by TrevorG » Fri Jul 12, 2019 10:03 am

Hi, did mine a few months back and spent out on better quality carpet and underlay so that I didn't need to bind the edges and the carpet could be moulded into shape by stretching and pressing. Just take your time.....I found that heavy weights left overnight on an uncut footwell piece helped in getting the shape prior to cutting.
Don't use the originals as templates, more as a guide, as they distort as you pull them out if stuck down with glue or age!
You can also think about changing the footwell ply pieces at the same time as they are naff.
Good luck....it is rewarding knowing you've done it.



Eric2205
Posts: 241
Joined: Fri Apr 07, 2017 2:11 pm

Replacement carpets

Post by Eric2205 » Fri Jul 12, 2019 11:07 am

Hello everyone

I do not need to change the mats of my Se5a so I can not say.
But a few years ago I bought at Coverdale a Carpet Set and Self Adhesive Underfelt for my Wolseley 1100
It was good quality and I had no particular problem



User avatar
scimmy_man
RSSOC Member
Posts: 1926
Joined: Fri Jan 04, 2008 7:07 pm
Location: selby yorkshire

Replacement carpets

Post by scimmy_man » Fri Jul 12, 2019 11:25 am

Eric2205 wrote:
Fri Jul 12, 2019 11:07 am
Hello everyone

I do not need to change the mats of my Se5a so I can not say.
But a few years ago I bought at Coverdale a Carpet Set and Self Adhesive Underfelt for my Wolseley 1100
It was good quality and I had no particular problem
yea but Coverdale have probably physically SEEN an Austin 1100.
from the carpets I have seen for Scimitars, they have worked off an out of focus photo,


I've taken a vow of poverty ...... Annoy me by sending me money!!

Post Reply

Return to “General Technical Discussion”