Page 1 of 1

Power steering pump bolts

Posted: Wed Apr 10, 2019 9:38 pm
by scimitargtc
Ok to get my 6a restarted replaced ignition system no start found dry carb bowl so off with the carb then off with the fuel pump and to get that off the power steering pump comes off and to get it back on the mounting bracket to front engine cover comes off to aid alignment then lose 1 of the pump to front mounting bracket bolts and also note the rear pump bracket is not bolted to the engine.. so does anyone know the bolt size I need for the front bracket to pump or better still has 1 they can sell me....

Power steering pump bolts

Posted: Wed Apr 10, 2019 10:03 pm
by Nigel Clark
There are two different sizes of bolt used on the power steering pump mounting. Some are 5/16" unf and the others are 3/8" unf.

Hope this helps,

Nigel

Power steering pump bolts

Posted: Wed Apr 10, 2019 10:30 pm
by scimitargtc
Thank you Nigel

Power steering pump bolts

Posted: Thu Apr 11, 2019 12:02 pm
by Roger Pennington
Also at least one of the bolts has a spacer, which is easily lost on removal, and difficult to replace.

Power steering pump bolts

Posted: Thu Apr 11, 2019 12:36 pm
by Geraint SabreGTCse5
which pump do you have? and also is the rear bracket a piece of angle bolted to the head, I may have them

Power steering pump bolts

Posted: Thu Apr 11, 2019 12:36 pm
by scimitargtc
Thanks Roger have the spacer thought it was something id out in!

Power steering pump bolts

Posted: Thu Apr 11, 2019 12:40 pm
by scimitargtc
My pump is the style on the left side of your photo

Power steering pump bolts

Posted: Thu Apr 11, 2019 1:01 pm
by Geraint SabreGTCse5
one on the left into the cylinder head (may/will need cutting down to suit your bracket) one on right from pump, if these are what you need send me your address by PM and I will post them to you Monday....

Power steering pump bolts

Posted: Thu Apr 11, 2019 2:10 pm
by scimitargtc
Yes please. Pm sent