Untitled Document

The Rear Axle requires that any build up of pressure is able to be released. This is done by a Breather Hole as below.

Pictures taken from Rear of Car. The Hole is on the Right (Off Side) Rear of the Axle.

All Pictures are expandable, Click on Image as required.

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *

When clearing the Breather Hole another check to do is to ensure that the Wheel Bearing Holes are clear.

These pictures were taken looking rearwards.

These holes are there to allow the grease to be pumped into the Wheel Bearing Nipple, around the Bearing and out of the Hole so ensuring the Grease has gone where it should be.