I have a Middlebridge system being built at the moment. It is designed to directly fit the aftermarket tubular manifolds currently available, accommodating the offset error and dispensing with the stepdown adapter. They will be made from 304 stainless and be as per originals, so 50mm and offset tailpipes with rolled ends. I have ordered one additional set, but they will not make any more without a car to build against.
Is there anyone who needs one? I can get more made whilst the car is there, to the same design. I would need to know in the next few days, sooner rather than later.
No price yet, I am expecting a quote tomorrow which I will post here.
Middlebridge exhaust systems
Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46
-
AJL Electronics
- RSSOC Member
- Posts: 7419
- Joined: Fri Oct 17, 2008 8:49 pm
- Location: Gloucester
- Has thanked: 42 times
- Been thanked: 206 times
- Contact:
Middlebridge exhaust systems
Yes, we can mend your Scimitar!
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).
Fancy a holiday in Gael, France? http://www.ianrhu.com
There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).
Fancy a holiday in Gael, France? http://www.ianrhu.com
There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.
-
AJL Electronics
- RSSOC Member
- Posts: 7419
- Joined: Fri Oct 17, 2008 8:49 pm
- Location: Gloucester
- Has thanked: 42 times
- Been thanked: 206 times
- Contact:
Re: Middlebridge exhaust systems
Final design...
Manufacturer suggests that the stub after the knuckle is far too long and so I have agreed that part of the job will be to cut the stub down to a better length. That is an easy job for installation. The original rubber mounting rings, properly spaced will be used as standard.
Material will be 304 stainless steel. I believe that will give a lifetime warranty.
Bore of the system is 50mm as per Middlebridge spec.
Tailpipes will be as per Middlebridge standard with the kick out and rolled ends.
Price ready to fit is £625 and I will have one set for stock only. Any more orders need to be NOW please, else the boat will sail.
Manufacturer suggests that the stub after the knuckle is far too long and so I have agreed that part of the job will be to cut the stub down to a better length. That is an easy job for installation. The original rubber mounting rings, properly spaced will be used as standard.
Material will be 304 stainless steel. I believe that will give a lifetime warranty.
Bore of the system is 50mm as per Middlebridge spec.
Tailpipes will be as per Middlebridge standard with the kick out and rolled ends.
Price ready to fit is £625 and I will have one set for stock only. Any more orders need to be NOW please, else the boat will sail.
Yes, we can mend your Scimitar!
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).
Fancy a holiday in Gael, France? http://www.ianrhu.com
There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).
Fancy a holiday in Gael, France? http://www.ianrhu.com
There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.
