Middlebridge suspension

Topics related solely to the Middlebridge Scimitars

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Post Reply
woomera
RSSOC Member
Posts: 7
Joined: Wed Sep 21, 2016 7:30 pm
Location: Durham

Middlebridge suspension

Post by woomera » Wed Aug 15, 2018 3:27 pm

Hi all,

Can anyone provide specifications, details, part numbers etc. for the original factory fitment Middlebridge Scimitar suspension? I understand the cars came with Bilstein coilovers front and back, and these passed through Harvey Bailey Engineering for tuning tweaks to match them to the specifics of the MB cars. I have approached Leda Suspension & Harvey Bailey Engineering Ltd. (as they are known now) but the company records don't show much more than the fact that H.B. did some Middlebridge work. The details of the Bilstein involvement are similarly patchy.

Best regards,

Graham



User avatar
Will Anderson
RSSOC Member
Posts: 1451
Joined: Sun Dec 31, 2006 1:58 pm
Location: Moray, Scotland
Has thanked: 37 times
Been thanked: 32 times

Middlebridge suspension

Post by Will Anderson » Wed Aug 15, 2018 7:51 pm

I don't think it will help much but part numbers are in the parts catalogue on Mick's site. Front damper assembly is 33037 and rear 330149.

If you want I can do a mailshot to the MESS members to see if any of them can help as not all are on Scimitarweb?


Will Anderson - RSSOC 4230 & Middlebridge Registrar
SE5a 1973, SE5a 1972, Middlebridge 14, 42, P.O. Middlebridge 46 & 67

woomera
RSSOC Member
Posts: 7
Joined: Wed Sep 21, 2016 7:30 pm
Location: Durham

Middlebridge suspension

Post by woomera » Thu Aug 16, 2018 4:21 pm

Hi Will,

Thanks for the reply. Yeah in fact that scan of the parts catalogue was provided to Mick's site by myself! :-) I think the document was still very much a work in progress when Middlebridge folded - certainly a lot of sketches appear to be straight SE6B and don't show certain later MB mods. I suspect the parts numbers don't relate to actual manufacturer's codes, and may have been intended simply as internal references within the company.

I have been in touch with some of the MESS people; Mick, Dan, George, so far, but yes a callout to MB owners if you could would be brilliant, thanks very much.



User avatar
peter freeman
RSSOC Member
Posts: 9315
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 304 times
Contact:

Middlebridge suspension

Post by peter freeman » Thu Aug 16, 2018 4:58 pm

My MB has Bilsteins fitted but no idea of which ones - no compliants



woomera
RSSOC Member
Posts: 7
Joined: Wed Sep 21, 2016 7:30 pm
Location: Durham

Middlebridge suspension

Post by woomera » Thu Aug 16, 2018 5:19 pm

Hi Peter,

Very interesting to hear. Are they the factory originals? Is there any way you could find out what specific Bilstein parts they are?



User avatar
peter freeman
RSSOC Member
Posts: 9315
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 304 times
Contact:

Middlebridge suspension

Post by peter freeman » Thu Aug 16, 2018 5:28 pm

I will have a look when time permits - to see if I can identify hem



User avatar
AJL Electronics
RSSOC Member
Posts: 7390
Joined: Fri Oct 17, 2008 8:49 pm
Location: Gloucester
Has thanked: 40 times
Been thanked: 203 times
Contact:

Middlebridge suspension

Post by AJL Electronics » Thu Aug 16, 2018 5:32 pm

Nothing worse than non compliant suspension Peter. ;-)


Yes, we can mend your Scimitar!
Order your Scimitar parts any hour of the day at http://www.classicmicrocars.com (member's discounts).

Fancy a holiday in Gael, France? http://www.ianrhu.com

There is no point trying to teach a pig to sing. It doesn't work and it annoys the pig.

User avatar
peter freeman
RSSOC Member
Posts: 9315
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 304 times
Contact:

Middlebridge suspension

Post by peter freeman » Thu Aug 16, 2018 5:45 pm

Looking through the paperwork that came with the car QRG supplied bushes for the shockers in 2010 so perhaps Nigel also supplied the shocker themselves - Looking further back GW supplied Konis for it in 1999



User avatar
Will Anderson
RSSOC Member
Posts: 1451
Joined: Sun Dec 31, 2006 1:58 pm
Location: Moray, Scotland
Has thanked: 37 times
Been thanked: 32 times

Middlebridge suspension

Post by Will Anderson » Thu Aug 16, 2018 7:24 pm

woomera wrote:
Thu Aug 16, 2018 4:21 pm
and may have been intended simply as internal references within the company.
I think you are right, that was my guess! :)
woomera wrote:
Thu Aug 16, 2018 4:21 pm
I have been in touch with some of the MESS people; Mick, Dan, George, so far, but yes a callout to MB owners if you could would be brilliant, thanks very much.
Hmmm, with the work they have done on shocks, if they don't have the answer we might be struggling but I will put out an email.


Will Anderson - RSSOC 4230 & Middlebridge Registrar
SE5a 1973, SE5a 1972, Middlebridge 14, 42, P.O. Middlebridge 46 & 67

midscotscim
RSSOC Member
Posts: 100
Joined: Mon Jul 26, 2010 12:34 am
Location: Kinross
Been thanked: 2 times

Middlebridge suspension

Post by midscotscim » Thu Aug 16, 2018 9:27 pm

Looking at the parts list a while back, I got the impression that the wishbones, hub & damper unit were supplied as pre assembled unit to bolt on to the chassis. Mine had Bilsteins on the front, replaced them 10 years ago with Girlings from GW. There were no visible markings on the original units save the Bilstein name. I did note the following however :-
Overall length = 15 inches, spring length ( on the damper ) = 10 inches, number of coils = 12
Unfortunately, I dont have the old units anymore.


Black Middlebridge

Post Reply

Return to “Middlebridge”