Bogging at 4000 rpm

Topics related solely to the Middlebridge Scimitars

Moderators: scimjim, Roger Pennington, Lukeyboy46, philhoward, erikscimitardemon

User avatar
toolmanchris
RSSOC Member
Posts: 506
Joined: Wed Dec 19, 2012 2:34 pm
Location: Doncaster
Has thanked: 3 times
Been thanked: 22 times
Contact:

Bogging at 4000 rpm

Post by toolmanchris » Tue Nov 21, 2017 10:32 am

I suppose if its not working properly it could also be messing about with the fuel/air ratio at higher speeds as well?


Chris Barker
http://www.toolmanweb.com/scimitar
RSSOC: 4125

Yellow SE5a - currently undergoing restoration
Seat Leon FR - daily driver
Silver Hyundai SantaFe 2.2 - for pulling the caravan

User avatar
scimjim
RSSOC Member
Posts: 33354
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 107 times
Been thanked: 640 times

Bogging at 4000 rpm

Post by scimjim » Tue Nov 21, 2017 10:44 am

High idle speed is probably because the throttle plates aren’t fully closed.


Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Tue Nov 21, 2017 12:31 pm

The idle speed control has always been like that, it doesn't bother me (and it has never bothered the engine - it was quicker than a 300+ bhp Corvette to 240 km/h)
I just thought I'd mention it.
I presume it is always in cold start mode :roll:

So, do we think it is a good idea to change the TPS?
Or try the new ECU before I send it back to Andy?


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

User avatar
tony.idle
RSSOC Member
Posts: 3453
Joined: Mon Jan 29, 2007 4:31 pm
Location: Kendal, Cumbria
Has thanked: 1 time
Been thanked: 54 times

Bogging at 4000 rpm

Post by tony.idle » Tue Nov 21, 2017 3:32 pm

I've just read this posting end-to-end and haven't seen a single mention of beating it with a large hammer so ..... well done everyone for having the patience. I've had a possibly irrelevant thought though: I noticed that the plug leads appear to be very close to, or even mixed with, wiring to the ECU. Is it possible to move the HT leads away from other wiring a little? It is possible that the engine shifting due to the failed gearbox mount has moved the relationship of HT leads to loom wiring. And have you changed the plugs recently? If you have did you use resistor plugs?


Regards

Tony

Embrace your feminine side - RTFM

RSSOC 2332 since 1981
Past: 2x5A, GTC. Current: SST, Smart, Hymer Motorhome, Rialto, Robin, Bug, MZ Skorpion x2.

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Wed Nov 22, 2017 5:32 pm

Thanks Tony, plugs are new and listed for 2,9, no idea if they are resistor plugs.
I'll have a look at the wiring runs.

Today I had an opportunity to take the car out and found yet another strange happening.
After a few days off, when plugged back in the idle speed control seems to work (for the first time ever :shock: )
This means that when cold the engine idles at 1300 rpm dropping to the usual 1100 rpm when hot.
If this continues I will have to look at adjusting those much-discussed throttle plates ...

It still doesn't like accelerating.


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

User avatar
tony.idle
RSSOC Member
Posts: 3453
Joined: Mon Jan 29, 2007 4:31 pm
Location: Kendal, Cumbria
Has thanked: 1 time
Been thanked: 54 times

Bogging at 4000 rpm

Post by tony.idle » Wed Nov 22, 2017 8:51 pm

Chris

There are still too many variables: remove and thoroughly clean the ISC. Do the same with the throttle bodies / MAF metering and while you're at it check butterfly operation and static setting - reset it as the manual suggests. Check when it's reconnected that you are getting WOT with the pedal to the floor. You need to ensure that basic adjustments are correct and that everything that can be visually checked has been before continuing to hunt down the fault. It doesn't matter whether any part mentioned above is causing the fault. At this age all engine controls need to be checked / serviced anyway. Doing that will eliminate a lot of unknowns and the fault might just be spotted when doing so.


Regards

Tony

Embrace your feminine side - RTFM

RSSOC 2332 since 1981
Past: 2x5A, GTC. Current: SST, Smart, Hymer Motorhome, Rialto, Robin, Bug, MZ Skorpion x2.

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Sun Nov 26, 2017 5:20 pm

Meanwhile, back at the asylum, I ordered a TPS, medium price, for '92 Scorpio.
It doesn't fit ...
Attachments
DSCF1101.jpg
DSCF1101.jpg (233.04 KiB) Viewed 228 times


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Sun Dec 03, 2017 4:26 pm

After that brief excursion into fantasy land (they are refunding me even my return postage :-) )
I tried to adjust the throttle plates, but either I don't understand the instructions, which is quite likely, or they are already at ground zero.
The operating lever wasn't even touching the throttle stop, still isn't, just in case it decides to adjust itself as the idle speed control did :roll:

So I changed my ECU with Superchip for Andy's without - and eliminated two possible causes at the same time.
The difference was noticeable without the Superchip, slightly lower idle speed and much smoother take up at low revs.
But it still wouldn't rev ...

I may try getting under the beast and checking the fuel pump and filter, they are recent but the symptoms are classic fuel starvation.
I have a spare pump but it's Ford so of course the inlet/outlet are not standard :bh
Attachments
DSCF1105.jpg
DSCF1105.jpg (341.34 KiB) Viewed 173 times


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

User avatar
Coupe Racing
RSSOC Member
Posts: 6660
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Been thanked: 65 times

Bogging at 4000 rpm

Post by Coupe Racing » Sun Dec 03, 2017 5:36 pm

Has the fuel pressure been checked and the vacuum at the fuel rail regulator ( if fitted )


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Sun Dec 03, 2017 5:51 pm

I can't remember, it's been going on so long (and I get confused with my two other cars which have not been working properly :roll: )
I've nothing to measure the pressure but I seem to think I checked petrol was passing and commented that it didn't seem a very strong flow.
There is a pressure regulator fitted - and I can never work out which is the entry and which is the exit :mrgreen:
Attachments
DSCF1027.jpg
DSCF1027.jpg (433.48 KiB) Viewed 150 times


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

User avatar
Coupe Racing
RSSOC Member
Posts: 6660
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Been thanked: 65 times

Bogging at 4000 rpm

Post by Coupe Racing » Sun Dec 03, 2017 10:19 pm

The flow should be quite dramatic as EFI requires pressure
I would check the fuel pressure


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
DARK STAR
RSSOC Member
Posts: 4876
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 49 times
Contact:

Bogging at 4000 rpm

Post by DARK STAR » Sun Dec 03, 2017 10:23 pm

Back to the hot-wiring !
It's just a bit irritating to take the boot interior to bits each time :roll:


Chris Johnson
RSSOC 1979> Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014>
Scimitar France Website No1 on Google, updated nearly every day

Post Reply

Return to “Middlebridge”