Mikeys / Greenys / Colin Watson v8 Coupe

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward

Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Wed May 01, 2019 5:47 pm

Next up - the one that i've really been putting off. Electrics.

I literally cant be arsed with wiring - so i farmed this job out to Dave at Widnes Auto Electrics. As per my request, he went over the car electrically with a fine tooth comb in addition to the work that i requested him to do. He had the car for nearly a week - fixed everything that id asked and much more besides.

Replaced the the hideous choco blocks behind the dash with some modern multiplugs.
Fixed the non working front lights.
Completely rewired the whole dash
Found a current drain on the coil feed circuit (he also chased down a random misfire for me)
Replaced various bits of burned out wiring

Not cheap - knocking on 400 quid for everything - but everything within the car works and i've got much more confidence in the thing now.

I can really recommend his work if you are in the marking for a wiring job.
Attachments
20190501_173937.jpg
20190501_173937.jpg (152.28 KiB) Viewed 1879 times
20190501_173904.jpg
20190501_173904.jpg (132.74 KiB) Viewed 1879 times



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Mon May 13, 2019 8:20 pm

20190513_135921.jpg
20190513_135921.jpg (181.95 KiB) Viewed 1799 times
Meh. The thing broke down on me last week - not a happy bunny.

It turns out that the brand new Lucas Ignition module which is connected to the brand new dizzy and brand new coil threw its hand in and shat itself.

My bad - apparently they need to be mounted onto a heatsink with thermal paste compund between the two.

Replacement ordered from Powerspark - Job jobbed. Havent test drove it yet since.



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Thu May 23, 2019 6:15 pm

All nice and low now I've given the old rear springs a haircut with the whizzer.
Attachments
20190523_180059.jpg
20190523_180059.jpg (260.02 KiB) Viewed 1718 times



User avatar
DARK STAR
RSSOC Member
Posts: 6074
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 92 times
Contact:

Mikeys / Greenys / Colin Watson v8 Coupe

Post by DARK STAR » Thu May 23, 2019 6:33 pm

Ah yes, that looks much better (and considerably more practical for going round corners :mrgreen: )


Chris Johnson
RSSOC 1979> Rhubarb SE6a V8 1979-1997 Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014-2018
Scimitar France Website No1 on Google, updated nearly every day

Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Thu May 23, 2019 6:48 pm

Thanks Dark Star!

The rear end height has been a constant irritation since I got the thing. Theres no issue with the exhausts bottoming out, or speed bumps which is a pleasant surprise.

Once its polybushed it'll be a proper sideways road weapon. I spoke to Colin a few weeks back, he gave me some pointers on the spec, so the Polybushes are on order now :-)



User avatar
Roger Pennington
RSSOC Member
Posts: 20168
Joined: Tue Aug 29, 2006 9:43 pm
Has thanked: 157 times
Been thanked: 538 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Roger Pennington » Thu May 23, 2019 7:04 pm

That's a big improvement! :D I suspect it was done more because of the "drag-racing" style that was popular at the time, rather than to gain extra ground clearance?


....Roger

RSSOC member (since 1982)
- - - - - - - - - - - - - - - - -
Image

"Condition can be bought at any time; Originality, once lost, is gone forever" - Doug Nye

Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Thu May 23, 2019 7:08 pm

Yes - it had big gumball 265/70/14 ditchfinders on the back. So It needed to be that high for clearance too. Not my cup of tea at all. To be honest, I thought it might have been done to cover up an issue with running SE5 gear on a Coupe, but im pleased to report that it was just an aesthetic thing



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Sat May 25, 2019 12:29 am

Tonight's effort. Matching Kirkey seats to replace the MGF ones which were lovely, but too big because of the enlarged transmission tunnel. Bada Bing
Attachments
20190525_001812.jpg
20190525_001812.jpg (188.75 KiB) Viewed 1640 times



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Sat Jun 15, 2019 11:24 am

Side2.jpg
Side2.jpg (195.53 KiB) Viewed 1375 times
Before and after - i love it when a plan comes together :-)
61018861_10162197162305352_4772178969069879296_o.jpg
61018861_10162197162305352_4772178969069879296_o.jpg (222.69 KiB) Viewed 1375 times



FuZ
Posts: 1
Joined: Tue May 29, 2018 8:36 pm

Mikeys / Greenys / Colin Watson v8 Coupe

Post by FuZ » Mon Jun 17, 2019 1:20 pm

It's looking great! I was a fan of it originally, but the tweaks you've been doing to it are improving it further.



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Sun Aug 11, 2019 2:17 pm

New update on the car here:-




User avatar
DARK STAR
RSSOC Member
Posts: 6074
Joined: Tue Aug 04, 2009 8:56 pm
Location: Antibes, France
Been thanked: 92 times
Contact:

Mikeys / Greenys / Colin Watson v8 Coupe

Post by DARK STAR » Sun Aug 11, 2019 5:40 pm

Very smart, and nicely presented :goodpost:


Chris Johnson
RSSOC 1979> Rhubarb SE6a V8 1979-1997 Dark Star Coupé 1989> Scimitar France 2010> Vert Soleil GTC 2014-2018
Scimitar France Website No1 on Google, updated nearly every day

Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Fri Aug 30, 2019 7:43 pm

Back from paint now. The cracked front end has now been repaired. The custom red paint couldnt be matched - so i went with black on the front.
Attachments
p2.jpg
p2.jpg (269.47 KiB) Viewed 669 times
p1.jpg
p1.jpg (272.5 KiB) Viewed 669 times



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Mon Sep 02, 2019 7:22 am

New grill on. AVO coilovers refitted at the rear too.
Attachments
20190901_150852.jpg
20190901_150852.jpg (289 KiB) Viewed 592 times



Revingtosh
RSSOC Member
Posts: 94
Joined: Sat Feb 25, 2017 11:31 pm
Has thanked: 6 times
Been thanked: 2 times

Mikeys / Greenys / Colin Watson v8 Coupe

Post by Revingtosh » Sat Nov 16, 2019 10:32 am

I decided to upgrade to Wilwoods as the brakes on it werent up to much & were falling to pieces - it looks like the pads have been cooked at some point.

Full Wilwood kit ordered from QRG as their quality is second to none

New Coupe trackrod ends ordered as I had incorrectly ordered SE5 ones - everything else on the car is 5a

Ongoing..

20191114_211143.jpg
20191114_211143.jpg (160.66 KiB) Viewed 142 times
Attachments
20191113_215942.jpg
20191113_215942.jpg (133.04 KiB) Viewed 142 times
20191114_222258.jpg
20191114_222258.jpg (111.32 KiB) Viewed 142 times



Post Reply

Return to “Coupé”