Coupe/ SAAB/ SE5 thing...

Post by **Dcrosby13** » Mon Apr 16, 2018 7:07 pm

OOOOHHHH

IMG_20180416_121851 by Darryl Crosby, on Flickr

IMG_20180416_122914 by Darryl Crosby, on Flickr

IMG_20180416_122946 by Darryl Crosby, on Flickr

IMG_20180416_131123 by Darryl Crosby, on Flickr

IMG_20180416_122309 by Darryl Crosby, on Flickr

IMG_20180416_130830 by Darryl Crosby, on Flickr

Post by **Dcrosby13** » Mon Apr 16, 2018 7:10 pm

Followed by some dirty graft stripping all the junk out of the interior from this.....

IMG_20170906_172748 by Darryl Crosby, on Flickr

IMG_20180416_133501 by Darryl Crosby, on Flickr

IMG_20180416_140832 by Darryl Crosby, on Flickr

IMG_20180416_144514 by Darryl Crosby, on Flickr

IMG_20180416_144625 by Darryl Crosby, on Flickr

Post by **Dcrosby13** » Mon Apr 16, 2018 7:11 pm

To this...

IMG_20180416_174700 by Darryl Crosby, on Flickr

IMG_20180416_174227 by Darryl Crosby, on Flickr

IMG_20180416_174216 by Darryl Crosby, on Flickr

Post by **Dcrosby13** » Mon Apr 16, 2018 7:29 pm

And a little bit of hacking at the body, not very neat but its a start...

IMG_20180416_171658 by Darryl Crosby, on Flickr

IMG_20180416_181530 (1) by Darryl Crosby, on Flickr

IMG_20180416_172453 by Darryl Crosby, on Flickr

Post by **MikeT** » Mon Apr 16, 2018 7:32 pm

Nice project - looking forward to updates

.

Good to have it documented in order here than facebook too imo

Cheers,

Mike.

Post by **Dcrosby13** » Mon Apr 16, 2018 7:37 pm

Thanks Mike

Post by **Dcrosby13** » Mon Apr 16, 2018 7:45 pm

And in response to the engine comments it will be fully stripped and inspected before we start using it, we have a full rebuild kit so whatever it needs it will get so when we do start burning rubber there will be no hiccups. should be abit of a monster with around 450-500bhp

Post by **Dcrosby13** » Mon Apr 16, 2018 7:46 pm

And everything to rebuild the axle also turned up today.

Post by **scimjim** » Mon Apr 16, 2018 7:48 pm

Hmm - I think I might have gone with much stickier tyres if I was aiming for 500BHP?

Post by **Dcrosby13** » Mon Apr 16, 2018 7:54 pm

Ah these are just for rolling it around, when I start competing I will buy another set of split rims and put some proper rubber on them

Post by **Dcrosby13** » Mon Apr 16, 2018 7:55 pm

that being said I had these same Toyo Proxies on my TVR and they were very good, quite compliant on the edge of grip and good for drifting.

Post by **Dcrosby13** » Tue Apr 17, 2018 11:53 am

Had the tyres put on the wheels today which means we are getting closer to a rolling chassis...

IMG_20180417_101734 by Darryl Crosby, on Flickr

IMG_20180417_110302 by Darryl Crosby, on Flickr

IMG_20180417_111046 by Darryl Crosby, on Flickr

Post by **Dcrosby13** » Tue Apr 17, 2018 11:55 am

And couldnt helping waving them in the direction of the Coupe shell

IMG_20180417_111547 by Darryl Crosby, on Flickr

IMG_20180417_111603 by Darryl Crosby, on Flickr

IMG_20180417_111554 by Darryl Crosby, on Flickr

Post by **Dcrosby13** » Tue Apr 17, 2018 3:03 pm

I also managed to get the glass out without breaking it which if you know me is impressive, I tend to break things just by looking at them and sometimes without.

IMG_20180417_133338 by Darryl Crosby, on Flickr

IMG_20180417_133746 by Darryl Crosby, on Flickr

IMG_20180417_133951 by Darryl Crosby, on Flickr

IMG_20180417_134253 by Darryl Crosby, on Flickr

IMG_20180417_134633 by Darryl Crosby, on Flickr

stevecrosby63 · Post by **stevecrosby63** » Tue Apr 17, 2018 7:23 pm

thats saved about 90kg already