Brake fail switch

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

ard126k
Posts: 512
Joined: Tue May 24, 2011 4:24 pm
Has thanked: 3 times
Been thanked: 15 times

Brake fail switch

Post by ard126k » Sun Feb 25, 2018 12:40 pm

Viewers of a sensitive nature may want to skip the next bit...
I decided to see if I could 'modify' the thread on the black switch to suit. I filed a gnat's off the tops of the threads and then turned and pushed it into the M/C body until the cylinder body caught the plastic and cut it to fit. Quite a reasonable copy I think?
IMG_0751.JPG
IMG_0751.JPG (206.25 KiB) Viewed 86 times
A check with the meter shows the switch works as expected so I'll get on and reassemble everything.


1971 SE5 1977 SE6 1982 GTC

Post Reply

Return to “Se6/6a/6b/GTC”