Oxford Distributor, Po and Ignition Coil urgently required!

Need help far away? Someone local might be able to help..

Moderators: scimjim, erikscimitardemon, philhoward, Lukeyboy46, Roger Pennington

Oxford Distributor, Po and Ignition Coil urgently required!

Postby Lysander » Thu Jul 06, 2017 1:18 am

Hello there, my car started cutting out at various speeds on the motorway in Oxfordshire today - granted it had been 6 hours f straight driving and much of it in heat.
However then it still always started whereas now after having sat, as soon as I start it, the engine turns, fires but immediately turns off afterwards. Now it isn't a fuel problem as there is enough arriving, and cleaning the rotor arm also did not help. My suspicion are ignition problems. So does anyone have the chance to help in Oxford or around here by any chance or has distributor, points or ignition coils kicking about?
Any help would be massively appreciated!
All the best,
Len
User avatar
Lysander
 
Posts: 63
Joined: Mon Jan 27, 2014 8:08 pm
Location: St Andrews, Scotland
Has thanked: 1 time
Been thanked: 0 time

Re: Oxford Distributor, Po and Ignition Coil urgently requir

Postby philhoward » Thu Jul 06, 2017 5:09 am

My first guess is either the ignition switch itself or (if it's a 6/6a) is a failing ballast resistor.
Phil Howard
Scimitarweb Forum Admin
SS1's - 1600 Rooster Turbo; Sabre Mk1.5
SE5a Barn Find Project 24 Valve conversion
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.
User avatar
philhoward
RSSOC Member
 
Posts: 22634
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 39 times
Been thanked: 437 times

Re: Oxford Distributor, Po and Ignition Coil urgently requir

Postby scimjim » Thu Jul 06, 2017 7:11 am

Yep, try a wire straight from the battery to the coil to discount ignition switch. Simply bypass ballast to disprove that (although ballast problems are often corroded connections).
Jim King

Current: SE5 (8Ball), 1600 SS1 (G97), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: SE6a (Katrina), 1400EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick), 1400 K series SS1 (Megan3), TI SS1 (snotty), 1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS
User avatar
scimjim
RSSOC Member
 
Posts: 32883
Images: 0
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 100 times
Been thanked: 699 times


Return to Scimaritans

Who is online

Users browsing this forum: No registered users and 1 guest

cron