Five 6x14 12mm offset Cobra Supaslot wheels - SOLD

Old ads will stay here for a while before being kicked out forever after 6 months or so.

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46, Terry Rickard

Locked
User avatar
David Tew
RSSOC Member
Posts: 278
Joined: Sun Aug 06, 2006 11:09 am
Location: Cotswolds
Has thanked: 5 times
Been thanked: 21 times

Five 6x14 12mm offset Cobra Supaslot wheels - SOLD

Post by David Tew » Sat May 12, 2018 6:22 pm

These were on my Coupe before it's rebuild and I was going to refit them after the rebuild. However, I have now got hold of some wheels with a more suitable offset for the 4HA axle I've fitted so these are now surplus. They have been cleaned and the inner well and rear is painted. I gave one a quick rub with some Belgom and it's come up really well; I'm sure the others would come up just as well. One does have a small scar around the rim caused by a tyre fitter :x but I just didn't use that wheel - it would probably polish out. They fit without spacers.

I'll include a brand new set of Bill Brighton stainless nuts and washers (cost £90 alone) and 5 centre caps.

I thought I'd offer them here before they go online. How does £200 for the lot sound?
20180512_151647.jpg
20180512_151647.jpg (257.76 KiB) Viewed 917 times
20180512_152730.jpg
20180512_152730.jpg (206.69 KiB) Viewed 917 times
20180512_154708.jpg
20180512_154708.jpg (260.81 KiB) Viewed 917 times
20180512_155237.jpg
20180512_155237.jpg (201.89 KiB) Viewed 917 times
Last edited by David Tew on Mon May 14, 2018 1:48 pm, edited 1 time in total.


SE4B Coupe - rebuilt on brand-new chassis.
RSSOC member since 1978. 😲
--------------------------------------------------------------------------------------------
Almost everything will work again if you unplug it for a few minutes…including you.

davidr1965
Posts: 8
Joined: Fri May 13, 2016 2:31 pm

Five 6x14 12mm offset Cobra Supaslot wheels inc. stainless bolts.

Post by davidr1965 » Sun May 13, 2018 1:30 pm

Hi mate...

Would these fit my Se5a as i do not know what the offset means on wheels...Sorry if i sound thick😂😂.

Where are you based please as the only problem is i am in Ipswich...Are they 114.3 pcd...

Many thanks

Dave



User avatar
David Tew
RSSOC Member
Posts: 278
Joined: Sun Aug 06, 2006 11:09 am
Location: Cotswolds
Has thanked: 5 times
Been thanked: 21 times

Five 6x14 12mm offset Cobra Supaslot wheels inc. stainless bolts.

Post by David Tew » Sun May 13, 2018 3:44 pm

Hi Dave.

Yes, they'd fit straight onto your SE5A. The Coupe has the same setup and they fitted perfectly.

I'm near Cheltenham so it's a fair haul unless you fancy a weekend break or there is a good Scimaritan going in the opposite direction. :wink:

David.


SE4B Coupe - rebuilt on brand-new chassis.
RSSOC member since 1978. 😲
--------------------------------------------------------------------------------------------
Almost everything will work again if you unplug it for a few minutes…including you.

davidr1965
Posts: 8
Joined: Fri May 13, 2016 2:31 pm

Five 6x14 12mm offset Cobra Supaslot wheels inc. stainless bolts.

Post by davidr1965 » Sun May 13, 2018 4:22 pm

Hi David..

I have sent a pm let me know if received..

Cheers

Dave



User avatar
David Tew
RSSOC Member
Posts: 278
Joined: Sun Aug 06, 2006 11:09 am
Location: Cotswolds
Has thanked: 5 times
Been thanked: 21 times

Five 6x14 12mm offset Cobra Supaslot wheels inc. stainless bolts.

Post by David Tew » Sun May 13, 2018 4:53 pm

davidr1965 wrote:
Sun May 13, 2018 4:22 pm
Hi David..

I have sent a pm let me know if received..

Cheers

Dave
Yes, received and replied to. :)


SE4B Coupe - rebuilt on brand-new chassis.
RSSOC member since 1978. 😲
--------------------------------------------------------------------------------------------
Almost everything will work again if you unplug it for a few minutes…including you.

Locked

Return to “Removed For Sale and Ebay”