Coupe se4 (67) v6

Old ads will stay here for a while before being kicked out forever after 6 months or so.

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46, Terry Rickard

Locked
backpain
RSSOC Member
Posts: 279
Joined: Sat Nov 21, 2009 10:27 am
Location: Norfolk
Has thanked: 26 times
Been thanked: 4 times

Coupe se4 (67) v6

Post by backpain » Fri Jul 13, 2018 11:05 am

Selling due to my health and down sizing home.I have owed for 4 years but started resto last year purchased from fellow member who told me engine was built by Scholar for a motorsports company Lansbury Haywood ,blueprinted with big valve heads.
I started by removing the body,Chassis was repaired ,cleaned ,painted with Rustoleum .A pair of s/steel exhausts by Langford with 3 branch manifolds refitted.New handbrake cable and adj spax fitted.
Engine Heads off cleaned waterways etc ,valves reground and found that inlet is 44.5 out 41 ,most core plugs changed,new parts fitted oil pump ,,Alternator ,,water pump,,petrol pump,,High torque starter,,Alloy timing wheel,,,coil plus lots of small stuff.


Brakes,, new discs,, recon 3 pot calipers fitted with green stuff pads..Girling mk2b brake servo powdercoated new seals/band .Main brake and clutch /slave all stripped, cleaned ,painted ,new seals.Frontend polybushed,,,gearchange bush kit fitted and overdrive service kit.

The inside is good ,front and back bumpers are not far off mint to very good

The car needs a respray badly,,the clutch plate is sticking is very difficult to get into gear so it will need a trailer to take home,Tyres are legal lots of tread but old I would not trust them.
I have not tried the overdrive don't think its wired up correctly.
Carb needs setting up and whole car needs someone to go round with a spanner and check for tightness .
I have driven it on the local road once since putting it back together, tax and mot free vhi
I have little idea of price so offers please ,pm me for more pics john

I have a set of bolt on wire wheels include fittings all new bar one I may add to deal if I get a good offer
Attachments
DSCF0043.JPG
DSCF0043.JPG (232.8 KiB) Viewed 615 times
IMG_0894.JPG
IMG_0894.JPG (141.5 KiB) Viewed 615 times
IMG_0891.JPG
IMG_0891.JPG (208.03 KiB) Viewed 615 times
IMG_0702.JPG
IMG_0702.JPG (228.9 KiB) Viewed 615 times
IMG_0710.JPG
IMG_0710.JPG (288.45 KiB) Viewed 615 times
IMG_0897.JPG
IMG_0897.JPG (178.16 KiB) Viewed 615 times


Miss Moneypenny Coupe

briankenyon
RSSOC Member
Posts: 140
Joined: Wed Aug 25, 2010 7:34 pm
Location: pelsall westmidlands
Been thanked: 3 times

Coupe se4 (67) v6

Post by briankenyon » Fri Jul 13, 2018 12:12 pm

Pm sent



User avatar
philhoward
RSSOC Member
Posts: 24052
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 41 times
Been thanked: 526 times
Contact:

Coupe se4 (67) v6

Post by philhoward » Tue Jul 17, 2018 4:59 pm

Removed from sale.


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

Locked

Return to “Removed For Sale and Ebay”