4x100 TSW alloys

Cars and Parts for Sale

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46, Terry Rickard

Post Reply
User avatar
scimjim
RSSOC Member
Posts: 35655
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 113 times
Been thanked: 813 times

4x100 TSW alloys

Post by scimjim » Wed Sep 12, 2018 12:20 pm

These were on an SS1 I bought but aren’t my cup of tea, so they’ve got to go :D

TSW somethings if the centre caps are to be believed - they’re 14” and I think 5.5” width with 35mm approx offset (measured). All wheels have scratches etc.

The tyres are toast, 3 hold air but one has a hole - I can remove these at no cost.

£50 collection only - I have a set of 195/70 ditchfinders dated 2001 with loads of tread that I would fit for an additional £25 if you just want something that will roll around the workshop?
CF7E66DB-F8DE-4ABD-A659-17386961FF75.jpeg
CF7E66DB-F8DE-4ABD-A659-17386961FF75.jpeg (375.44 KiB) Viewed 190 times
9E746541-C6B7-45D7-AAB7-4FE469FA1A41.jpeg
9E746541-C6B7-45D7-AAB7-4FE469FA1A41.jpeg (442.51 KiB) Viewed 190 times


Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

Post Reply

Return to “For Sale”