Page 1 of 1

Modified top suspension mounts for Coupe. SOLD

Posted: Tue Feb 13, 2018 4:48 pm
by David Tew
Now that my Coupe rebuild is nearing the end I've been clearing out all my surplus bits and pieces and have come across these stainless brackets. I bought them from Don Pither just before I started the rebuild (shows how long it's been going on! :oops: ) as, having decided to fit a 4HA axle, I wanted to space the front suspension the same amount. In the end Ian Daniels modified the chassis for me so I never used the brackets. Are they any use to anyone?

They'll bolt on to convert the top Coupe suspension and shocker fitting to GTE width. All that is then required is to plate over the inset chassis fittings at the bottom. They're really strongly made (weigh about 2.5Kgs) and cost me about £90 originally. However, I'm willing to let an RSSOC member have them for £20 delivered.
rsz_20180124_103542.jpg
rsz_20180124_103542.jpg (109.84 KiB) Viewed 516 times

Modified top suspension mounts for Coupe.

Posted: Tue Feb 13, 2018 5:43 pm
by Oaksey
Yes please :)

Modified top suspension mounts for Coupe.

Posted: Tue Feb 13, 2018 7:09 pm
by David Tew
Hi Josh, that was quick! :)

I'll PM you.

David.