Fuel line

Moderators: scimjim, erikscimitardemon, Lukeyboy46, Roger Pennington, philhoward

Post Reply
Penfold13
RSSOC Member
Posts: 32
Joined: Sun Oct 28, 2018 11:21 am
Has thanked: 5 times
Been thanked: 1 time

Fuel line

Post by Penfold13 » Fri Apr 19, 2019 10:17 am

Hello,

Looking at getting fuel lines to replace the unknown stuff currently fitted, I know that AJL has the best stuff available, but which size and how much will I need? Any special clips/fitting to get at the same time? I was going to get some stainless steel hose clips whilst I was at it.

Thank you,
Chris


‘72 SE5A

Rev Light
RSSOC Member
Posts: 624
Joined: Sat Nov 14, 2015 11:54 am
Location: Swindon
Has thanked: 9 times
Been thanked: 30 times

Fuel line

Post by Rev Light » Fri Apr 19, 2019 10:58 am

Andy will know. If in doubt, replace it all.

Steve


SE5a 'Fancier'

User avatar
philhoward
RSSOC Member
Posts: 25143
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 58 times
Been thanked: 624 times
Contact:

Fuel line

Post by philhoward » Fri Apr 19, 2019 11:04 am

Make sure they’re fuel line clips, not normal jubilee clips.

I’ve got a feeling it’s all 8mm? If using AJL’s Cohline then I think you need 12-14mm clips which I’m sure he sells as well?

I suspect 1m will do a full car, but as a Steve says, Andy will know for sure.


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

Rev Light
RSSOC Member
Posts: 624
Joined: Sat Nov 14, 2015 11:54 am
Location: Swindon
Has thanked: 9 times
Been thanked: 30 times

Fuel line

Post by Rev Light » Thu Apr 25, 2019 3:45 pm

Interestingly enough, I had a fuel line failure on my Campervan this weekend. All over the top of a flat four engine. Glad I spotted it before the engine got hot.

Cheers

Steve


SE5a 'Fancier'

Post Reply

Return to “Se5/5a”