Stainless Steel Door hinge mountings

PLEASE ONLY start a NEW topic if you have a specific part that hasn't got a topic already, and that you need and cannot get hold of through Club Traders. Make the topic name clear (Model and Part details). Anyone else also wanting that part should add a message to the topic.

Moderators: scimjim, philhoward, Lukeyboy46, erikscimitardemon, Roger Pennington

cannonball
RSSOC Member
Posts: 176
Joined: Mon Dec 04, 2017 7:59 pm
Location: Highlands
Has thanked: 9 times
Been thanked: 7 times

Stainless Steel Door hinge mountings

Post by cannonball » Mon Apr 22, 2019 11:30 am

An Australian Scimitar? :D



gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Mon Apr 22, 2019 1:27 pm

Yes Brian I would say they were the parallel type before someone made a slot in the top 2 holes.
And I can just make out the hinge holes in the Aussie Scim. :lol:
I have these kits in stock at £32 per CAR =X4 inc post.

BACS transfer is better for me or a cheque?.
Will need full details and an email and phone for the delivery.

Cheers Mark
Last edited by gtcse8 on Mon Apr 22, 2019 1:50 pm, edited 1 time in total.


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

briankenyon
RSSOC Member
Posts: 167
Joined: Wed Aug 25, 2010 7:34 pm
Location: pelsall westmidlands
Been thanked: 3 times

Stainless Steel Door hinge mountings

Post by briankenyon » Mon Apr 22, 2019 1:35 pm

Pm sent



BodgerBen
RSSOC Member
Posts: 20
Joined: Tue Jun 08, 2010 7:25 pm
Location: Liphook, Hampshire

Stainless Steel Door hinge mountings

Post by BodgerBen » Thu Apr 25, 2019 6:54 pm

Hi Mark - if there's any available pls can I grab a set - PM Sent.



BodgerBen
RSSOC Member
Posts: 20
Joined: Tue Jun 08, 2010 7:25 pm
Location: Liphook, Hampshire

Stainless Steel Door hinge mountings

Post by BodgerBen » Tue May 07, 2019 9:12 pm

Many thanks for the set Mark.



User avatar
giddo
RSSOC Member
Posts: 41
Joined: Wed Aug 02, 2017 10:24 am
Location: Fordingbridge, Hampshire
Has thanked: 3 times
Been thanked: 2 times

Stainless Steel Door hinge mountings

Post by giddo » Sat May 25, 2019 12:10 am

Hi Mark,
I've just come across this thread, I too would like a set (2 doors) for the GTC
Contact via PM or to :-
mike@giddmania.org


Mike Giddens
The frog ? I live in a village called Frogham

gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Sat May 25, 2019 8:38 am

Email sent Mike. :wink:

Just had a price rise on the Stainless Steel so any more sets requested will be £34 inclusive, or £35 for the longer Coupe/SE5 type :cry:


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

User avatar
Smiler
Posts: 548
Joined: Fri Aug 10, 2007 1:45 pm
Location: Wiltshire
Has thanked: 14 times
Been thanked: 4 times
Contact:

Stainless Steel Door hinge mountings

Post by Smiler » Tue Jun 11, 2019 10:34 pm

Is this still going? If so I would be interested in a set for an SE5 and a set for an SE6A.


http://www.Auto-tat.co.uk

'96 Range Rover P38 DSE - Daily Cruiser
'71 Reliant Scimitar SE5 O/D - Jag V6 Project
'79 Reliant Scimitar SE6A - Burtles Original 3.0ltr Omega Conversion! - In dry storage waiting its turn.

'85 Ford Escort Cabrio - 2.0ltr Zetec - SOLD
'82 Ford Cortina - 24valve Cosworth - SOLD
'91 BMW E34 'Project: Bratwurst' race car - SOLD
'72 VW Camper - SOLD

gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Wed Jun 12, 2019 7:38 am

Smiler wrote:
Tue Jun 11, 2019 10:34 pm
Is this still going
Yes
Would need to know the bolt pattern for the SE5 though, there are Two types used.

Mark


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

User avatar
Smiler
Posts: 548
Joined: Fri Aug 10, 2007 1:45 pm
Location: Wiltshire
Has thanked: 14 times
Been thanked: 4 times
Contact:

Stainless Steel Door hinge mountings

Post by Smiler » Wed Jun 12, 2019 12:25 pm

Ok, I shall take a look and get some measurements.

Are these regularly available or are you just getting the one batch made up? Only asking as I realy need to fix the A post inserts on the SE5 first and the SE6A is currently in storage (but has knackered doors).

Cheers,

Simon.


http://www.Auto-tat.co.uk

'96 Range Rover P38 DSE - Daily Cruiser
'71 Reliant Scimitar SE5 O/D - Jag V6 Project
'79 Reliant Scimitar SE6A - Burtles Original 3.0ltr Omega Conversion! - In dry storage waiting its turn.

'85 Ford Escort Cabrio - 2.0ltr Zetec - SOLD
'82 Ford Cortina - 24valve Cosworth - SOLD
'91 BMW E34 'Project: Bratwurst' race car - SOLD
'72 VW Camper - SOLD

gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Wed Jun 12, 2019 12:34 pm

Hi Simon
I can always be contacted at gtcse8@gmail.com

I keep a few sets back just in case.
I currently have a set for all types of hinges, £34 for SE5a etc and £35 for the Longer Offset Coupe/5 types, postage can be reduced if more than one set ordered.
The SE5 type are either equidistant parallel bolts or Staggered offset, so that is all I need to know.
I also still have a few "Blanks for the A post repair sections at £35 each in galvanised sheet.
Will post some pictures later.
Mark
Last edited by gtcse8 on Thu Jun 13, 2019 7:49 am, edited 1 time in total.


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

User avatar
Smiler
Posts: 548
Joined: Fri Aug 10, 2007 1:45 pm
Location: Wiltshire
Has thanked: 14 times
Been thanked: 4 times
Contact:

Stainless Steel Door hinge mountings

Post by Smiler » Wed Jun 12, 2019 9:04 pm

Oh good, I shall wait to see the photos.


http://www.Auto-tat.co.uk

'96 Range Rover P38 DSE - Daily Cruiser
'71 Reliant Scimitar SE5 O/D - Jag V6 Project
'79 Reliant Scimitar SE6A - Burtles Original 3.0ltr Omega Conversion! - In dry storage waiting its turn.

'85 Ford Escort Cabrio - 2.0ltr Zetec - SOLD
'82 Ford Cortina - 24valve Cosworth - SOLD
'91 BMW E34 'Project: Bratwurst' race car - SOLD
'72 VW Camper - SOLD

gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Sun Jun 16, 2019 7:33 pm

IMG_20190524_152003.jpg
A post repair sections
IMG_20190524_152003.jpg (143.59 KiB) Viewed 736 times
A frame plates and blank
SE5 & 6 mount plates (2).jpg
SE5 & 6 mount plates (2).jpg (125.63 KiB) Viewed 736 times
Original mount plates, SE5a on Left, SE6 onwards on Right.
Forgot to photograph the SS ones but you get the Idea.


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

User avatar
Smiler
Posts: 548
Joined: Fri Aug 10, 2007 1:45 pm
Location: Wiltshire
Has thanked: 14 times
Been thanked: 4 times
Contact:

Stainless Steel Door hinge mountings

Post by Smiler » Tue Jun 18, 2019 5:47 pm

Thanks for the photos. Do the A post sections come 'assembled' (folded and welded) or do you just supply them as blanks?

Cheers.


http://www.Auto-tat.co.uk

'96 Range Rover P38 DSE - Daily Cruiser
'71 Reliant Scimitar SE5 O/D - Jag V6 Project
'79 Reliant Scimitar SE6A - Burtles Original 3.0ltr Omega Conversion! - In dry storage waiting its turn.

'85 Ford Escort Cabrio - 2.0ltr Zetec - SOLD
'82 Ford Cortina - 24valve Cosworth - SOLD
'91 BMW E34 'Project: Bratwurst' race car - SOLD
'72 VW Camper - SOLD

gtcse8
RSSOC Member
Posts: 1912
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 18 times
Been thanked: 115 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Tue Jun 18, 2019 6:31 pm

They arrive as a finished unit ready to bond into the darkest recesses of the body.
You will see I have included DATUM holes for the hinges to help in positioning the support plated while bonding takes place.

" IF " you just wanted a " section ", then I can produce those to order.

I also have the rear support plates if needed.


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

Post Reply

Return to “Parts Re-Manufacture Requests”