1800Ti Exhaust Manifold

PLEASE ONLY start a NEW topic if you have a specific part that hasn't got a topic already, and that you need and cannot get hold of through Club Traders. Make the topic name clear (Model and Part details). Anyone else also wanting that part should add a message to the topic.

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Supersub
RSSOC Member
Posts: 246
Joined: Tue Apr 20, 2010 3:29 pm
Location: Forest Town, Mansfield
Been thanked: 2 times

1800Ti Exhaust Manifold

Post by Supersub » Sun Sep 24, 2017 3:59 pm

Hi Phil

As I no longer have the SST can you remove me from the list pls.

Many thanks
Mike


Mike Storey
1996 Nissan QX 3.0ltr SEL
1996 Quantum 1.9ltr 2+2
2004 Mondeo MKIII 130TDCi Estate
Previous: -1990 SST 1800Ti, 1993 Sabre 1400, 1992 Sabre 1400 (based on 1991 SST), 1972 se5a gte, 1968 SE4b Coupe

sub zero
RSSOC Member
Posts: 12
Joined: Fri Aug 25, 2017 6:34 pm

1800Ti Exhaust Manifold

Post by sub zero » Tue Oct 10, 2017 6:33 pm

Hi phil as i purchased mikes SST can you put me down as a possible This is only not a firm order as 1 Been going on for 7 years up to now and who knows how much longer and 2 no idea of the price but i want a spare.



User avatar
CNHSS1
RSSOC Member
Posts: 13884
Joined: Tue Aug 22, 2006 5:13 pm
Location: Shrewsbury, Shropshire
Has thanked: 224 times
Been thanked: 210 times
Contact:

1800Ti Exhaust Manifold

Post by CNHSS1 » Mon Oct 23, 2017 10:01 pm

There's an original manifold and elbow on ebay now, paul maddison is seller along with few other Ti bits


Racing is life, everything before and after, is just waiting--Steve McQueen
6 time Class Champ, 2006 & 2014 SSSC Champion

RIP Batmobile, await the Rise of Dark Knight 8)
Sabre 'Light Sabre' 360hp!!
Image

User avatar
frase29
Posts: 105
Joined: Fri Dec 09, 2016 3:54 am
Location: Bucks/Cambs
Has thanked: 7 times
Been thanked: 4 times

1800Ti Exhaust Manifold

Post by frase29 » Thu Feb 15, 2018 2:18 am

Who's currently attached to this project..? As a manufacturing engineering student I'm happy to lend some time (especially after my exams finish in early May) if it might help get the wheels turning! I've also got a little experience with exhaust manifold design, though admittedly tubular welded rather than cast...


'87 SS1 1800ti: LSD, Megasquirt, EBC, Launch Control (oh and a decent stereo ;) )

User avatar
reliant-reviver
RSSOC Member
Posts: 4577
Joined: Thu Jun 14, 2007 8:05 pm
Location: Beighton, Sheffield
Has thanked: 64 times
Been thanked: 106 times

1800Ti Exhaust Manifold

Post by reliant-reviver » Thu Feb 15, 2018 9:38 am

I still have the best intentions to get this sorted... at some point. As time goes by it will become an ever increasing issue, but so far I've not heard of anyone stranded with a car that cannot go back together. A manifold has to be pretty far gone to be beyond salvaging, although I realise it would be preferable for most to spend the money and fit a new replacement that has not been subject to repair.

The route that Chris Eades took is not without it's own issues, and really, I do not think it is viable to have those produced on mass as the supporting modifications required mean that it will not be an appropriate option for many who want a direct fit. To my understanding the patterns are held with the foundry, and they can cast them to order. But it then comes to the machining issues that caused previous headaches. These are issues that were created by some oversight in the patterns produced, not allowing for enough clearance around the fittings, and some difference in the turbo mounting location.

If anyone wishes to further investigate persuing Chris's uprated manifold, I'm happy to hand on what I have and I suspect he can assist also.

Photos for reference -
manifold1.jpg
manifold1.jpg (46.62 KiB) Viewed 977 times
DSCF5525small.jpg
DSCF5525small.jpg (94.93 KiB) Viewed 977 times
20160125_173912.jpg
20160125_173912.jpg (121.61 KiB) Viewed 977 times
20160125_174022.jpg
20160125_174022.jpg (158.56 KiB) Viewed 977 times

My view is that the original manifold needs to be reverse engineered. Not altered or modified in any way. Just re-produced in exact standard format and cast in a suitable / higher grade material. Admittedly though I have not made any further inquiries into having this done with a casting company, although there are now plenty on my doorstep what with being in Sheffield! That said, you can't help but look to the far east and the £60-100 manifolds they are producing and thinking "what-if?"

An alternative idea would be having just the port flange section cast, as a singular piece, incorporating the flange and leading abruptly out to two slightly splayed round stubs. Two of these coupled with an off the shelf T2/T25 collector flange, would then allow for bespoke fabrication of a thick wall tubular manifold using "weld elbows" which is a common and straightforward means of fabricating manifolds. Possibility for batch production, slight adaptions for different spec turbos, and actually a very durable end product. However, this brings together the cost of casting and the cost of fabrication time. Although the former is less involved, and the latter is simplified with repeat-ability.

I would also point out that any new manifolds that go into circulation potentially free up a number of secondhand standard units that may be suitable for re-use.


Philip Andrew.
'74 Robin Super Saloon, '84 SS1 1300, '86 SS1 1800ti, '87 SS1 1300
Previous: I lost count around fifty.

Dcrosby13
RSSOC Member
Posts: 564
Joined: Mon Mar 28, 2016 5:28 pm
Location: Warrington
Has thanked: 4 times
Been thanked: 14 times

1800Ti Exhaust Manifold

Post by Dcrosby13 » Tue Jul 24, 2018 2:34 pm

I would be interested also.


I break stuff...... :w

Post Reply

Return to “Parts Re-Manufacture Requests”