Wiper Motor Ref nr query

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Post Reply
RSSOC Member
Posts: 283
Joined: Thu Jan 15, 2009 9:10 pm
Location: Norwich
Been thanked: 1 time

Wiper Motor Ref nr query

Post by scimrick » Tue Mar 20, 2018 5:30 pm

Am having intermittent stickiness of wiper arms not reseating at lower edge of screen and being sluggish on a wet screen despite new blades. I've trawled through recent posts which give great guidance; as I intend to check and refurb/regrease as recent comments and advice. I have a replacement brush set, and probably will need the self-parking switch cleaning/replacing.
However, before I do the work I understood that the 14W ref on the motor casing was for Front wipers, and the 16W ref was for Rear wipers. If that's correct, then my GTC currently has a 16W motor running the front wipers.
Q1 - should GTC wiper be the 14W type?
Q2 - is the only difference between the 2 types the wheel/gear that defines the amount of arc the wipers go through? If so I assume can be "easily" swapped between motors.
Any answers that help to select a route to correct the fault will be welcome!

User avatar
RSSOC Member
Posts: 24125
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 42 times
Been thanked: 534 times

Wiper Motor Ref nr query

Post by philhoward » Tue Mar 20, 2018 7:12 pm

I thought the GTC had a 16W front?

Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

User avatar
RSSOC Member
Posts: 36133
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 114 times
Been thanked: 840 times

Wiper Motor Ref nr query

Post by scimjim » Tue Mar 20, 2018 7:58 pm

Yep 6b/GTC use 16W on the front.

Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.

RSSOC Member
Posts: 4935
Joined: Sun Mar 15, 2009 5:12 pm
Location: Hyde, Cheshire
Has thanked: 14 times
Been thanked: 113 times

Wiper Motor Ref nr query

Post by ScimmyMike » Tue Mar 20, 2018 9:30 pm

I'd be looking at your wheel boxes as well, when they get worn lots of slack result, you can remove bundy, turn spindles 180 degrees and reinsert bundy which then runs on the unused side of the wheels

SE4c rebuilding. SE5a similar it seems!
SAAB C900 2 door
Scimitar SE4 SE4c SE5 SE6b Austin A35

High Peak Noggin Secretary & general dogsbody

www.high peak noggin

If you can see the tree before you hit it that's understeer
if you only feel the tree as you hit it that's oversteer

RSSOC Member
Posts: 283
Joined: Thu Jan 15, 2009 9:10 pm
Location: Norwich
Been thanked: 1 time

Wiper Motor Ref nr query

Post by scimrick » Wed Mar 21, 2018 10:48 pm

Jim & Phil - thanks for confirming it should be the 16W ref as fitted.

Mike - replaced wheel boxes & rack about 2 years ago due to judder & repositioned wiper jets to bonnet, wiper motor greased up & ok at that time. Didn't check wiper motor ref then, assumed it was the original. Fun job accessing wheel boxes but easier when I enlarged access holes!

User avatar
RSSOC Member
Posts: 28
Joined: Wed Aug 02, 2017 10:24 am
Location: Fordingbridge, Hampshire
Has thanked: 1 time
Been thanked: 2 times

Wiper Motor Ref nr query

Post by giddo » Sat Mar 31, 2018 11:16 pm

Scimrick; you may find
I have bought - but not yet fitted - stop switch and brush set from them.

Mike Giddens
The frog ? I live in a village called Frogham

Posts: 173
Joined: Fri Nov 29, 2013 1:37 pm
Been thanked: 14 times

Wiper Motor Ref nr query

Post by derekoss » Sat Mar 31, 2018 11:45 pm

The 14w switch and brush plate are different from the 16w. Plenty on the web about rebuilding a 16w. Can even be rewound if required.


Post Reply

Return to “General Technical Discussion”