Search found 5218 matches

by AJL Electronics
Sun Jan 21, 2018 2:32 pm
Forum: Project Progress
Topic: SE5a Body Off Resto
Replies: 55
Views: 3052

SE5a Body Off Resto

Amazing thanks for the advice, what grit would you use? Start CAREFULLY with 120 grit, only going to 80 if you really have to. Just be aware that you can do a lot of damage with a D/A if you are not used to it. After all the paint is off and before doing any repair work, clean what is left thorough...
by AJL Electronics
Sun Jan 21, 2018 1:11 pm
Forum: Project Progress
Topic: SE5a Body Off Resto
Replies: 55
Views: 3052

SE5a Body Off Resto

It depends on what the state is of the current paint. If reasonable, then D/A is the obvious choice for the larger areas and hand sanding for everywhere else. Try to take it down to remove the first coat of factory applied filler/primer, this is where the microblistering generally starts. Then use L...
by AJL Electronics
Sun Jan 14, 2018 9:09 pm
Forum: General Technical Discussion
Topic: inconsistant starting or consistant non starting!
Replies: 44
Views: 1135

inconsistant starting or consistant non starting!

Try a hotwire. My bet is failing contacts in the ignition switch. Something often seen before and gives these symptoms.
by AJL Electronics
Fri Jan 12, 2018 2:42 pm
Forum: Middlebridge
Topic: Bogging at 4000 rpm
Replies: 272
Views: 11156

Bogging at 4000 rpm

R7 is under spec for fuel injection. R9 minimum, but Biohose is the best you can buy, it even copes with 100% Ethanol.
by AJL Electronics
Tue Jan 09, 2018 2:58 pm
Forum: General Technical Discussion
Topic: 38dgas plastic heat spacer
Replies: 11
Views: 274

38dgas plastic heat spacer

Terry Rickard wrote:
Tue Jan 09, 2018 2:16 pm
Why 2 gaskets between top of the spacer and bottom of the carb? I have only ever used 1 each side of the spacer (with W-plate fitted).
Because of the "undulations" in the carburettor base. The original factory gasket was a thick one. So you replace it with two modified standard gaskets.
by AJL Electronics
Tue Jan 09, 2018 12:23 pm
Forum: General Technical Discussion
Topic: 38dgas plastic heat spacer
Replies: 11
Views: 274

38dgas plastic heat spacer

One uncut gasket on the bottom, then W plate and two cut gaskets.
by AJL Electronics
Mon Jan 08, 2018 9:11 pm
Forum: For Sale
Topic: Toying with the idea of selling my GTC
Replies: 11
Views: 1232

Toying with the idea of selling my GTC

Having had a most unwelcome Christmas card from HMRC, I could do with selling to raise the money I now have to find!

£5995 and I am happy to fit the new seats and footwell carpets if wanted.
by AJL Electronics
Sat Jan 06, 2018 1:37 pm
Forum: Middlebridge
Topic: Bogging at 4000 rpm
Replies: 272
Views: 11156

Bogging at 4000 rpm

Why don't you just order it from my webshop?

http://ajlelectronics.co.uk/epages/8323 ... s/BIOHOSE8
by AJL Electronics
Wed Jan 03, 2018 9:41 pm
Forum: SS1/SST/Sabre
Topic: SST RECORDS, HELP PLEASE
Replies: 36
Views: 1318

SST RECORDS, HELP PLEASE

H7SST was put on the car in the late 90's by a PO. Richard still has the registration on retention, if anyone would like to purchase same? I think it got back its original reg when Fred took it to France, see what his V5 says.
by AJL Electronics
Wed Dec 27, 2017 9:45 pm
Forum: Wanted
Topic: Wanted by me - SE 6A or 6B Auto
Replies: 4
Views: 357

Wanted by me - SE 6A or 6B Auto

I may have just the car for you. Either as is, running and roadworthy but needing attention, or fully sorted. It is a very nice example so it wouldn't be cheap!
by AJL Electronics
Fri Dec 15, 2017 4:31 pm
Forum: General Technical Discussion
Topic: New Battery for SE6a
Replies: 20
Views: 976

New Battery for SE6a

I use and sell the Varta B32 at £60 for the Se6a. Lots of punch in a small package. I have one in stock if you are nearby.
by AJL Electronics
Tue Dec 12, 2017 10:12 am
Forum: South West
Topic: Gloucester Noggin
Replies: 218
Views: 6157

Gloucester Noggin

Noggin tonight at the Royal William...

Due to the forecast of -10C tonight and the location of the venue, I have been advised that some members will not be attending. I think that it is a sensible decision and so I suggest that we cancel December's noggin and re-convene in January.
by AJL Electronics
Fri Dec 08, 2017 9:51 pm
Forum: Se6/6a/6b/GTC
Topic: DAB Aerial recommendations
Replies: 11
Views: 528

DAB Aerial recommendations

No such beast as a digital aerial! A conventional car aerial will work with DAB but it's worth getting the filter / splitter unit if only to give the correct connectors. For my project, I have mounted a seperate DAB aerial inside the rear quarter, but on the Scorpio, I use the filter / splitter and ...
by AJL Electronics
Tue Dec 05, 2017 11:25 am
Forum: Jokes
Topic: CITREON
Replies: 5
Views: 401

CITREON

Dave 6726 wrote:
Tue Dec 05, 2017 10:27 am
It definately is..............
The French for lemon is Citron.
by AJL Electronics
Sat Dec 02, 2017 10:08 am
Forum: General Technical Discussion
Topic: Coil spring compressor
Replies: 38
Views: 1630

Coil spring compressor

Or try these for size https://www.machinemart.co.uk/p/laser-4764-motorcycle-coil-spring-compressor/ They are available withoutthe metal case and looked just the job... Until I looked at the reviews! out of 5 starsThis is my second set the last set just wore ... Byzak65on 24 June 2016 Verified Purch...

Go to advanced search