Search found 4164 matches

by Coupe Racing
Wed Oct 17, 2018 11:11 am
Forum: Se5/5a
Topic: SHOCK CHOICE
Replies: 20
Views: 1395

SHOCK CHOICE

Judging by the mods carried out you can measure the mounting points of the damper in it's ride height condition as shown in your picture. I should think that the damper manufacturer should then be able to advise on damper lengths and spring lengths What spring rates you use is another question entir...
by Coupe Racing
Mon Oct 15, 2018 8:46 am
Forum: Coupé
Topic: Coupe boot lock
Replies: 9
Views: 209

Coupe boot lock

Again from memory
When it's locked the button does not push in
The lock is pretty well protected by a plate so parts movement should not be an issue
However the button plunger no longer actiing on the catch is the likely problem
There was a discussion about this very recently
by Coupe Racing
Sun Oct 14, 2018 9:23 pm
Forum: Project Progress
Topic: Goldie the Coupe
Replies: 13
Views: 574

Goldie the Coupe

If you remove the grille you can release the catch
The cables often rust solid
by Coupe Racing
Sun Oct 14, 2018 7:03 pm
Forum: Coupé
Topic: Coupe boot lock
Replies: 9
Views: 209

Coupe boot lock

Vertical from memory but wait for others to confirm
by Coupe Racing
Sun Oct 14, 2018 11:17 am
Forum: General Technical Discussion
Topic: SE4 Coupe 4 Pots
Replies: 7
Views: 282

SE4 Coupe 4 Pots

I have no idea what's fitted
Possibly only you and the previous keepers will be able to answer that
However if you have the chassis number you can tell if it was a V6 car
by Coupe Racing
Sun Oct 14, 2018 8:13 am
Forum: General Technical Discussion
Topic: SE4 Coupe 4 Pots
Replies: 7
Views: 282

SE4 Coupe 4 Pots

If you have a V6 with GTE type front suspension then yoo will be ok
by Coupe Racing
Fri Oct 12, 2018 9:17 pm
Forum: Project Progress
Topic: '74 SE5a rolling resto
Replies: 103
Views: 15210

'74 SE5a rolling resto

Roll centre has been lowered
by Coupe Racing
Fri Oct 12, 2018 5:48 pm
Forum: General Technical Discussion
Topic: Coupe brakes binding
Replies: 13
Views: 450

Coupe brakes binding

Still sounds like the valve on the servo to me

Or the orientation of the servo

There must be free play in the pedal via the actuating rod otherwise the heat transfer from the engine bay will take away any slack if any
by Coupe Racing
Thu Oct 11, 2018 8:01 pm
Forum: Non-Technical Discussion
Topic: Good or Appropriate Number Plates
Replies: 1182
Views: 93325

Good or Appropriate Number Plates

And every bus has BUS as part of their registration plate :D
by Coupe Racing
Thu Oct 11, 2018 5:59 pm
Forum: Wanted
Topic: WANTED SE5 or COUPE
Replies: 20
Views: 1179

WANTED SE5 or COUPE

miss mine
by Coupe Racing
Thu Oct 11, 2018 4:55 pm
Forum: Wanted
Topic: WANTED SE5 or COUPE
Replies: 20
Views: 1179

WANTED SE5 or COUPE

go on - what is it :shock:
by Coupe Racing
Thu Oct 11, 2018 1:47 pm
Forum: General Technical Discussion
Topic: SE6A: Front suspension arm suddenly snapped
Replies: 10
Views: 471

SE6A: Front suspension arm suddenly snapped

Unfortunately this has happened before
by Coupe Racing
Tue Oct 09, 2018 12:39 pm
Forum: Middlebridge
Topic: Top and Bottom Hoses
Replies: 14
Views: 512

Top and Bottom Hoses

If you have leaking core plugs then the boiling point of the coolant will surely be altered!
by Coupe Racing
Mon Oct 08, 2018 9:56 am
Forum: Se6/6a/6b/GTC
Topic: Lockheed clutch master cylinder operation
Replies: 8
Views: 281

Lockheed clutch master cylinder operation

Wasn't the query about the clutch Andy ?
by Coupe Racing
Sat Oct 06, 2018 5:56 pm
Forum: Non-Technical Discussion
Topic: Spot the Scimitar - fun caption quiz
Replies: 79
Views: 7043

Spot the Scimitar - fun caption quiz

I was born in Mdina, also known as the Silent City, so I suppose I should shut up. :| But "IF" the club did have plans for an apartment in Malta "AND" I keep annoying folk, can I go find one, and test drive it?? :?: Just arrived on Gozo to test drive possible locations for Team HQ (Malta Division) ...

Go to advanced search