Search found 133 matches

by Roxyone
Tue May 08, 2018 11:37 am
Forum: General Technical Discussion
Topic: Stainless Steel SE6A wiper blades
Replies: 7
Views: 363

Stainless Steel SE6A wiper blades

Try TEX Automotive In Witney they supply excellent s/s blades and arms.
by Roxyone
Fri Jan 27, 2017 4:00 pm
Forum: Se6/6a/6b/GTC
Topic: SE6A Windscreen wiper arms
Replies: 9
Views: 911

Re: SE6A Windscreen wiper arms

TEX Automotive do them in stainless steel to fit the se6 you can also use the adjustable length ones which have a screw clamp which helps if your splines are a bit worn.
Google TEX Automotive, hope this helps.
by Roxyone
Sun Dec 25, 2016 8:04 pm
Forum: Se6/6a/6b/GTC
Topic: Sunroofs - how many different factory types?
Replies: 16
Views: 1954

Re: Sunroofs - how many different factory types?

My se6b the first to be built in 1983 was factory fitted with a Hollandia electric tilt and slide sunroof.
by Roxyone
Wed Sep 28, 2016 3:46 pm
Forum: Scimitar Sightings
Topic: Yellow coupe
Replies: 0
Views: 471

Yellow coupe

Yellow coupe sighted today at 2.15 in Pinkneys Green Maidenhead. It looked like Geoff Richards to me.
by Roxyone
Sat Aug 13, 2016 7:32 pm
Forum: General Technical Discussion
Topic: Transmission oil
Replies: 8
Views: 521

Re: Transmission oil

Well, I was only trying to be helpful!
by Roxyone
Sat Aug 13, 2016 6:15 pm
Forum: General Technical Discussion
Topic: Transmission oil
Replies: 8
Views: 521

Re: Transmission oil

It is highly unlikely that having GL5 in your gearbox
for a short time would cause either of problems you are experiencing.
by Roxyone
Wed Jul 06, 2016 5:02 pm
Forum: General Technical Discussion
Topic: How to fit E clips to Lockheed brake cylinders?
Replies: 11
Views: 775

Re: How to fit E clips to Lockheed brake cylinders?

Brilliant, glad it worked for you. I had my back axle rebuilt by Will about 16 years ago and he fitted the brake cylinders like that, apparently they devised that method when he used to race and rally Minis. I am sure that if the method is good enough for rallying it's good enough for us. Pretty wel...
by Roxyone
Sun Jul 03, 2016 3:38 pm
Forum: General Technical Discussion
Topic: How to fit E clips to Lockheed brake cylinders?
Replies: 11
Views: 775

Re: How to fit E clips to Lockheed brake cylinders?

Or, a tip I learned from Will Sparrow - Remove the roll pin, tap a thread in the resulting hole ( I think it's 5mm ) and secure with an allen screw.
by Roxyone
Wed Jun 01, 2016 3:33 pm
Forum: General Technical Discussion
Topic: Diesel question, sorry
Replies: 9
Views: 477

Re: Diesel question, sorry

Also check that air is not entering the fuel line when hot.
by Roxyone
Wed Jan 27, 2016 8:11 pm
Forum: General Technical Discussion
Topic: Scimitar Friendly Garages?
Replies: 4
Views: 552

Re: Scimitar Friendly Garages?

You could try Moorside Garage in Maidenhead Tel 01628 637015, they do my MOT and any work that I don't want to do myself. If you call then best to speak to Mick Weidner ( the owner ) and tell him you were recommended by Mike Smith with the Scimitar, Jeep and Kangoo van. I have used them for 20 years...
by Roxyone
Sun Jan 24, 2016 7:18 pm
Forum: General Technical Discussion
Topic: wiring query but not cars
Replies: 10
Views: 824

Re: wiring query but not cars

The regulations you are referring to are part P of the building regulations, they were brought in in 2005 and made electrical installations a controlled service for the first time. Jenny Tongue, a Liberal Democrat MP, had a daughter killed whilst drilling a hole in her kitchen wall and hit a cable. ...
by Roxyone
Tue Nov 10, 2015 5:42 pm
Forum: Se6/6a/6b/GTC
Topic: No power to solenoid / starter
Replies: 2
Views: 317

Re: No power to solenoid / starter

Check the contacts in the plug and socket, in wiring loom, beneath the wiper motor.
by Roxyone
Thu Nov 05, 2015 5:45 pm
Forum: Se6/6a/6b/GTC
Topic: Clutch Woes
Replies: 27
Views: 2601

Re: Clutch Woes

I think that .625" matches the original Lockheed slave cylinder or it does in my case ( '83 SE6b ) I had quite a long chat with Rimmer Bros. a couple of years ago but they could not find a Girling master cylinder with a bore that small, which I suppose is why people change the Girling master cylinde...
by Roxyone
Sun Nov 01, 2015 6:35 pm
Forum: Se6/6a/6b/GTC
Topic: Clutch Woes
Replies: 27
Views: 2601

Re: Clutch Woes

The original Lockheed master cylinder had a bore size of .625 inch.
by Roxyone
Mon Oct 05, 2015 9:28 am
Forum: Se6/6a/6b/GTC
Topic: petrol smell? 76 6a
Replies: 17
Views: 829

Re: petrol smell? 76 6a

I had exactly that with my 6b, the metal angle pipe which connects the filler to the rubber hose is welded at the angle joint, mine had a hole in the welding. I had a spare new pipe but if that is your problem the hole could be welded or soldered.

Go to advanced search